Toshiba satellite m35x Manuel D’Utilisation

173

 

 

 

 

 

5.375 x 8.375 ver 2.3

Make sure the drive tray has closed properly. Press gently 
until it clicks into place.

Open the drive tray and remove the disc. Make sure the drive 
tray is clean. Any dirt or foreign object can interfere with the 
laser beam.

Examine the disc to see whether it is dirty. If necessary, wipe 
it with a clean cloth dipped in water or a neutral cleaner.

Replace the disc in the tray. Make sure it is lying flat, label 
side uppermost. Press the disc down until it locks on the 
spindle. Close the drive tray carefully, making sure it has shut 
completely.

Make sure the computer is connected to a power source and 
turned on. The modular bay drive eject mechanism requires 
power to operate.

To remove a disc without turning on the computer, use a 
narrow object, such as a straightened paper clip, to press the 
manual eject button. This button is in the small hole next to 
the disc eject button on the right side of the computer.

Never use a pencil to press the manual eject button. Pencil 
lead can break off inside the computer and damage it.

Pull the tray fully open, remove the disc and place it in its 

If the problem is with an application CD-ROM, refer to the 
software’s documentation and check that the hardware 
configuration meets the program’s needs.