Toshiba satellite pro 4200 notebook Manuel D’Utilisation
User's Manual
Getting Started 3-7
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Turning off the power
When you have finished work, follow the steps below to turn off the power
to your computer.
to your computer.
1.
If you have entered data, save it to the hard disk or to a diskette.
2.
Make sure all disk activity has stopped, then remove any CD-ROM,
DVD-ROM or diskette.
DVD-ROM or diskette.
Make sure the Built-in HDD and Diskette/CD-ROM/DVD-ROM drive
indicators are off. If you turn off the power while a disk is being accessed,
you can lose data or damage the disk.
indicators are off. If you turn off the power while a disk is being accessed,
you can lose data or damage the disk.
3.
If you are using Windows 95, click Start then click Shut Down
or Suspend.
or Suspend.
If you are using Windows 98, click Start and click Shut Down. From
the Shut Down menu select Shut Down or Standby.
the Shut Down menu select Shut Down or Standby.
Shut Down
exits all applications; Suspend and Standby saves the
screen as it is so you can continue where you left when you turn the
power back on.
power back on.
Generally, it is a good idea to use the Windows Shut Down menu rather
than the power switch to turn off the computer. However, if you are using
Windows 95, you can activate the Toshiba Service power off function to
ensure a safe shutdown when you press the power switch.
than the power switch to turn off the computer. However, if you are using
Windows 95, you can activate the Toshiba Service power off function to
ensure a safe shutdown when you press the power switch.
4.
Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
to let all capacitors fully discharge.
Restarting the computer
Certain conditions require that you reset the system. For example, if:
You change certain computer settings.
An error occurs and the computer does not respond to your keyboard
commands.
commands.
There are five ways to reset the computer system:
1.
Select Shut Down from the Windows Shut Down menu in the Start
box. After the computer shuts down, turn the power back on.
box. After the computer shuts down, turn the power back on.
2.
Select Restart from the Windows Shut Down menu in the Start box.
3.
Press Ctrl + Alt + Del.
4.
If you’re experiencing a problem with a software application and the
computer does not accept keyboard input, press the reset button.
computer does not accept keyboard input, press the reset button.
5.
Turn the power off, wait 10 to 15 seconds, then turn the power on
again by pressing the power button. (This method works only when the
computer is in boot mode.)
again by pressing the power button. (This method works only when the
computer is in boot mode.)