Toshiba satellite pro gmad00333010 Manuel D’Utilisation
60
Getting Started
Using external display devices
Connecting an HDMI™-compatible television or display device
To connect an HDMI™-compatible television or display device to
the computer:
the computer:
❖
Connect one end of an HDMI™ cable (not included with your
computer) to the HDMI™ Out port on the side of your
computer, and then connect the other end of the cable to your
television or display device. Refer to the manual that came
with the television or display device for more information.
computer) to the HDMI™ Out port on the side of your
computer, and then connect the other end of the cable to your
television or display device. Refer to the manual that came
with the television or display device for more information.
Your computer should automatically detect the external display
device.
device.
In the future you can change the display settings by pressing the
(
) + P keys
, or by configuring the display properties settings.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
and turned on.
The quickest way to change the display output settings is to use the
(
) + P
keys:
Press
(
) + P
repeatedly until the setting you want takes effect.
Briefly pause each time you press the
(
) + P
key to allow time for
the display to change.
This cycles through the settings in the following order (the last two
options are available if an external monitor is connected):
options are available if an external monitor is connected):
NOTE
NOTE