Toshiba satellite pro psafgu-020002 Manuel D’Utilisation

169

This section lists common modem problems.

Make sure the cable from the modem to the telephone line is firmly 
connected to the computer’s modem port and the telephone line 
jack.

Check the port settings to make sure the hardware and software are 
referring to the same COM port. See 

.

Check the communications parameters (baud rate, parity, data 
length and stop bits) specified in the communications program. It 
should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400, 
28800, 33600 bps (bits per second) or higher. Refer to the 
program’s documentation and the modem manual for information 
on how to change these settings.

Make sure the line has a dial tone. Connect a telephone handset to 
the line to check this.

The other system may be busy or off line. Try making a test 
transmission to someone else.

For more information regarding your system’s V.92 modem, visit 
the Toshiba Web site at 

.

This section provides general troubleshooting tips for networking 
problems, specifically wireless (Wi-Fi

®

) networking.

The terms and concepts used assume a basic understanding of 
networks, and may be for more advanced users. If you need 
assistance or if you are not familiar with the terminology, please see 
Windows

®

 Help and Support or contact your computer technician.

❖

If your computer is equipped with an internal Wi-Fi

®

 adapter, 

verify that the Wi-Fi

®

 antenna switch is on (the Wi-Fi

®

 light 

 

will be lit).

NOTE