Toshiba satellite pro psafgu-020002 Manuel D’Utilisation

62

Before connecting an external monitor or video projector, configure 
your computer for the type of device you are connecting. To do this, 
refer to the documentation for your operating system and devices.

You can easily attach an external monitor or projector to your 
computer if you need a larger screen. To do this:

Connect the monitor’s video cable to the RGB (monitor) port 
on the side of the computer.

Connect the device’s power cable to a live electrical outlet.

Turn on the external device.

Your computer will automatically detect the external display 
device and activate a screen with display options.

Select the settings you desire and click Apply.

Click OK.

Once you have connected an external display device, you can 
choose to use the internal display only, the external device only, or 
both simultaneously. 

Some modes are only available with the appropriate device attached 
and turned on.

The quickest way to change the display output settings is to use the 
display hot key (

Fn

 + 

F5

):

While holding down 

Fn

, press 

F5

 repeatedly, pausing between 

each press, until the setting you want takes effect.

This hot key cycles through the settings in the following order:

❖

Built-in display only

❖

Built-in display and external monitor simultaneously

❖

External monitor only

❖

Built-in display and TV (or other external video device) 
simultaneously

❖

TV (or other external video device) only

❖

Built-in display and external monitor (extended desktop)

❖

Built-in display and TV (extended desktop)

NOTE