Toshiba scale view v4 Manuel D’Utilisation
Data Maintenance
Scale View V4.0 Owner’s Manual
Page 4
18-Oct-04
Field Requirement
Unit Price
When the unit price of a Weigh Mode PLU is set to $00.00 you
must set the Price Per field to Lb Open. When the unit price of
a By Count Mode PLU is set to $00.00 you must set the
Pieces field to “0” and the Price Per field to Lb Open. Failure
to do this will result in PLU DATA ERROR when recalling
those PLU’s.
must set the Price Per field to Lb Open. When the unit price of
a By Count Mode PLU is set to $00.00 you must set the
Pieces field to “0” and the Price Per field to Lb Open. Failure
to do this will result in PLU DATA ERROR when recalling
those PLU’s.
Sale Price
If the Sale Price field is set to any number larger than $00.00
when downloading the entire PLU file or a PLU Batch to the
scale the Sale Price field will be sent as the unit price. If the
Sale Price is set to $00.00 then the unit price field entry will be
sent to the scale.
when downloading the entire PLU file or a PLU Batch to the
scale the Sale Price field will be sent as the unit price. If the
Sale Price is set to $00.00 then the unit price field entry will be
sent to the scale.
Sale Number
The software allows for up to 9 different Sale Batches for the
entire PLU database. This feature will be discussed in the Set
Back section of this manual.
entire PLU database. This feature will be discussed in the Set
Back section of this manual.
Shortened
Commodity Name
Commodity Name
This box is only used for the SFKC name on the SL5300. It
has a limit of 24 characters and spaces maximum. It may also
be multiple lines. Keep in mind that a carriage return is
counted as a character.
has a limit of 24 characters and spaces maximum. It may also
be multiple lines. Keep in mind that a carriage return is
counted as a character.
Batch On/Off Box
This box indicates the status of a PLU’s Batch flag. If it is
checked it means the PLU is part of a pending batch. If it is
not checked then the PLU is not part of a pending batch.
checked it means the PLU is part of a pending batch. If it is
not checked then the PLU is not part of a pending batch.
Saving PLU’s
After you have entered all of the appropriate information for a PLU you will need to
save it to the database. This is done by depressing the Save button at the top of
the PLU Maintenance Form. Once you have depressed the Save button you will be
prompted with three options.
save it to the database. This is done by depressing the Save button at the top of
the PLU Maintenance Form. Once you have depressed the Save button you will be
prompted with three options.
If you answer YES, the PLU will be saved to the
database and added to a PLU batch.
database and added to a PLU batch.
If you answer NO, the PLU will be saved to the
database but will not be added to a PLU batch.
database but will not be added to a PLU batch.
If you answer CANCEL then the information you have
programmed will be discarded and the PLU will not be
added to the database.
programmed will be discarded and the PLU will not be
added to the database.
Editing PLU’s
To edit a PLU, simply “double-click” on the desired PLU in the database. Make the necessary
changes and then click the Save button. When editing the PLU you may change any information
except the PLU number. If the PLU belongs in another department, change the department
number and depress the Save button. You should then delete the original PLU.