Toshiba sd-270e Manuel D’Utilisation

Page de 38
25
Notes
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT 
   jack of the DVD video player to the AC-3 RF input of 
   a Dolby Digital Receiver.  This input on your A/V Receiver
    is reserved for Laserdisc use only and is incompatible with 
   the COAXIAL DIGITAL AUDIO OUT jack of the DVD 
   video player.
• Connect  the  COAXIAL  DIGITAL  AUDIO  OUT  jack  of 
   the DVD  video  player  to  the “DIGITAL  (COAXIAL)” 
   input  of  a Receiver or Processor.
• Refer to the owner’s manual of the connected 
   equipment as well.
• When you connect the DVD video player to other
   equipment, be sure to turn off the power and unplug all of
   the equipment from the wall outlet before making any 
  connections.
• The  output  sound  of  the  DVD  video  player  has  a 
  wide dynamic range. Be sure to adjust the receiver’s 
   volume to a moderate listening level. Otherwise, the 
   speakers may be damaged by a sudden high volume 
   sound.
• Turn off the amplifier before you connect or disconnect
   the DVD  video  player’s  power  cord. If you  leave  the 
   amplifier power on, the speakers may be damaged.
• For connection to your TV, see “Connecting to a TV” 
   (see pages 21~23).
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment.
Warning
• When  you  are  connecting  (via  the  COAXIAL 
  DIGITAL AUDIO OUT jack) an AV decoder that does 
  not have Dolby Digital,  Digital  Theater  Systems 
  (DTS)  or  MPEG2 decoding function, be sure to set 
  “Digital Output” to “PCM” from the on-screen displays
  see page 32. Otherwise, high volume sound may 
  damage your hearing as well as the speakers.  
• When playing DTS-encoded discs (DVD Video discs 
  and audio  CDs),  excessive  noise  may  be  output 
  from  the analogue audio output jacks.  To avoid 
  possible damage to the  audio  system,  you  should 
  take  proper  precautions when  the  analogue  audio 
  output  jacks  of  the  DVD  video player are connected
  to an amplification system.  To enjoy DTS Digital 
  Surround™ playback, an external 5.1 channel DTS 
  Digital  Surround™  decoder  system  must  be
  connected to the COAXIAL DIGITAL AUDIO OUT jack
  of the DVD video player.
Connections