Toshiba strata ip5000 Manuel D’Utilisation

There are two types of Call Forwarding that you can set. One is System Call Forward 
(set in System Programming) which automatically directs calls to a predefined 
location, such as Voice Mail. See your System Administrator to determine or change 
your System Call Forward destination. 

The other type is Station Call Forwarding. You can use Station Call Forwarding to 
replace your System Call Forward destination with a custom Call Forward setting 
made from your station.

System Call Forward directs calls to a destination preset by an Administrator for each 
telephone, commonly set to voice mail. 

To turn on System Call Forward for your telephone, press 

#620

. Confirmation 

tone (three short tones) and display shows “DATA PROGRAMMED.” This 
indicates the data is set.

To turn off System Call Forward for your telephone, press 

#621

. Confirmation 

tone (three short tones) and display shows “DATA PROGRAMMED.” This 
indicates the data is set.

Station Call Forward enables you to assign Call Forward destinations for each 
extension on your telephone that will override the telephone’s System Call Forward 
settings. Each extension can be independently setup to Station Call Forward to a 
unique destination. You can set a Programmable Feature Button to perform any Call 
Forward function - see 

 for more details. 

Call Forward must be set prior to receiving the call.

The following calls to your station can be forwarded:

•

Internal calls

•

Auto Attendant calls

•

Outside lines that ring only your station

•

Transferred internal or incoming line calls