Toshiba strata ip5000 Manuel D’Utilisation

Outside callers with touch tone telephones can call in to lines programmed for Direct 
Inward System Access (DISA) and dial an extension or outgoing line without going 
through an attendant or operator. Check with your System Administrator to see if this 
features is available for your telephone.

1. From outside the system, dial the public telephone number assigned to DISA. The 

call will be answered and you will hear system dial tone.

If you do not dial within 10 seconds, the line disconnects.

2. When you hear dial tone, dial an extension or an outside line.

3. If you dial an outside destination, you may need to enter a security code provided 

to you by the System Administrator. When you hear the tone, enter the security 
code. If accepted, the call will proceed.

4. If you receive busy tone and you want to dial another number while the station is 

still ringing, press 

*

 and repeat Step 2.

This optional feature enables you to use a 

DSS

 button to connect directly to another 

station’s line extension. The DSS LED shows the status (idle/busy) of the station and/
or the station’s primary extension. For example, a station’s DSS button LED shows 
busy (light steady red) when the station is:

•

busy on a call on any button

•

idle but all appearances of the station’s extension are in use by other stations.

When the station is in DND, the LED flashes red.

1. When connected to a line or another station, press 

DSS

.

The original party is put on-hold. You can call a station even if the DSS LED 
shows busy (steady red).

2. Announce the call...or transfer the call by hanging up or pressing 

Release

.

You can transfer the call to an idle or busy station.