Toshiba 32ax60 Manuel D’Utilisation
2
Ref
er
ence
Connecting
y
our T
V
Connecting your TV
If you have not connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section.
Note: Cables are not supplied.
been frustrated in the past, you may wish to read this section.
Note: Cables are not supplied.
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F” connectors.
• Audio and video cables are usually color coded according to use:
yellow for video; red and white for audio. The red audio cable is
for the stereo right channel; the white audio cable is for the stereo
(or mono) left channel. If you look at the rear panel of the TV,
you will see that the terminals are color coded in the same manner
as the cables.
for the stereo right channel; the white audio cable is for the stereo
(or mono) left channel. If you look at the rear panel of the TV,
you will see that the terminals are color coded in the same manner
as the cables.
• S-video cables provide better picture performance. S-video cables
can be used only with S-video compatible components.
• ColorStream
TM
cables come in sets of three and provide the best
picture performance. ColorStream cables can be used only with
ColorStream compatible components.
ColorStream compatible components.
ANTENNA
Coaxial Cable
AUDIO
Cable
VIDEO
Cable
ColorStream
Cable
S-Video
Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
grams, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
Stereo VCR
VIDEO
AUDIO
OUT
IN from ANT
CH 3
CH 4
CH 4
OUT to TV
L
R
IN
ANT-1
OUT
ANT (75
Ω
)
ANT-2
IN
OUT
DVD IN
VIDEO
COLOR
STREAM
INPUT
STREAM
INPUT
VIDEO 2 VIDEO 1
MONO
L/MONO
S VIDEO
L
R
AUDIO
L
R
AUDIO
R
AUDIO
Y
Cb
Cr
TV
Cable Lead-in from Cable Box
or Antenna
or Antenna
VIDEO
Caution:
Do not plug in the TV power cord until
you have finished connecting all of your
equipment.
Do not plug in the TV power cord until
you have finished connecting all of your
equipment.
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use the S-video
connections and omit the video cable.
connections and omit the video cable.
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
S-video cable to Video-1 simultaneously.