Toshiba strata ip5000 Manuel D’Utilisation

If you call an extension and it’s busy or there is no answer, you may be able to light 
that extension’s Message Waiting LED and enable that extension to call you back. 
The ability to perform this feature is set in system programming.

1. Dial an internal extension. You hear busy tone or there’s no answer.

2. Press  

or 

7

. The Msg LED flashes red on the called telephone. At your 

telephone, the Msg LED lights steady red and the LCD shows the station number 
where you set a Message Waiting light. Example: “MW SET TO 3620.”

If you decide to cancel the Message Waiting light at this point, press 

 or 

7 

again while ring-over tone is playing and the light will be cancelled.

3. Press 

. Your Msg LED turns Off. The Msg LED on the called telephone 

flashes until the called party presses the flashing 

 button which calls you 

back.

4. To turn Off a Message LED that you have set on another extension, press 

#64

 plus 

the extension number that has the message light set. Then press 

 or hang up to 

release your telephone. Your LCD shows the extension and “MW CANCEL.”

...or dial the extension that you set the Message LED on, then press 

77

. Then press 

 or hang up to release your telephone.