Toshiba st-7000 Manuel D’Utilisation
3. CONNECTORS
EO1-12029
3. CONNECTORS
3- 1
3. CONNECTORS
Connector Description
AC Inlet
A connector for the AC inlet
AC Outlet
A connector to supply AC power to the CRT.
AC power is output in synchronization with the ON/OFF status of the POS terminal.
AC power is output in synchronization with the ON/OFF status of the POS terminal.
P24V DC Outlet
A terminal of a DC24V line to which the power cable of the Receipt/Journal printer is
connected.
connected.
PS/2 (Mouse, Keyboard) Mini-DIN 6-pin female type connector
Connector for the PS/2 type mouse, Connector for the PS/2 type keyboard
USB0, 1, 2, 3 (Powered
USB)
USB4 (General 5V USB)
USB)
USB4 (General 5V USB)
Connector for the USB (Universal Serial Bus) interface USB V2.0/1.1 and UHCI
(conforming to Universal Hub Controller Interface V2.0/1.1)
(conforming to Universal Hub Controller Interface V2.0/1.1)
NOTE: USB functions may not be supported depending on the Operating System.
USB0 to USB3 are powered USB sockets, which are 3 ports of 12V USB (USB0 to
USB2) and 1 port of 24V USB (USB3). The lower part of these sockets can be used
as general 5V USB connectors.
USB2) and 1 port of 24V USB (USB3). The lower part of these sockets can be used
as general 5V USB connectors.
LAN
Modular type connector for the 10BASE-T/100BASE-TX LAN interface
DRW1, DRW2
A 24V type drawer is connectable.
DVI-D, LVDS
Expandable LCD interface (Option)
VGA
A 15-pin VGA connector to the CRT
COM1,2
D-sub 9-pin male type connector (without power supply)
A slot scanner, modem, serial Interface type scale, EFT, etc. are connectable.
A slot scanner, modem, serial Interface type scale, EFT, etc. are connectable.
COM3, 4, 5, 6
D-sub 9-pin female type connector (with +5V, +12V output)
A line display unit or RS-232C type hand scanner is connectable.
A line display unit or RS-232C type hand scanner is connectable.
NOTES:
1 COM4 cannot be used when the touch panel TFT is connected to the POS terminal.
2. COM6 is available only when the optional kit is installed.
2. COM6 is available only when the optional kit is installed.
LPT1
D-sub 25-pin female connector
Printer, etc. having a Centronics interface or equivalent are connectable.
Printer, etc. having a Centronics interface or equivalent are connectable.
Line-out
Used for connecting an external speaker via the stereo mini jack terminal
Mic-in
Used for connecting a monophonic microphone via the mono mini jack terminal
*: COM6 is installed on the PCI slot.
LAN
COM6 (Option)*
Line-out
PCI Slot
Not Used
Powered USB
USB0 USB1 USB2 USB3
(12V-1) (12V-2) (12V-3) (24V)
COM5
COM1
COM3
LPT1
COM2
COM4
VGA
DRW1, DRW2
DVI-D, LVDS (Option)
USB4
PS/2 (Mouse)
PS/2 (Keyboard)
Not used (5VB)
AC Outlet
AC Inlet
24V DC Outlet
Mic-in