Toshiba symbio bdx2400ku Manuel D’Utilisation
26
SPDIF
When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:
Bitstream: Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby
®
or DTS
®
or
PCM audio signal.
PCM: Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo audio
signal.
Re-encode: Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby
®
or DTS
®
and you want to hear both PIP audio and the movie audio on Blu-ray™ video.
Off: No audio will be output via COAXIAL DIGITAL output jack.
Bitstream: Selects Bitstream output if your receiver HDMI IN supports Dolby
®
or DTS
®
or PCM audio
signal.
PCM: Selects PCM output if your receiver HDMI IN only supports PCM audio signal.
Re-encode: Selects Re-encode if your receiver’s HDMI IN supports Dolby
®
or DTS
®
and you want to
hear both PIP audio and movie audio on Blu-ray™ video.
Off: No audio will be output via HDMI OUT jack.
HDMI
When you connect an HDMI
TM
device to the HDMI OUT jack, the available options are:
1
In the
Setting menu, use the / button to select Audio and press OK.
2
Press the / button to select an option and press
OK.
3
Use the / button to select the desired audio setting and press
OK.
4
Press the button or the
RETURN button to return to the previous menu.
Audio Setting
Customizing
Customizing
This section describes the various setting options of this Symbio™ Media Box and Blu-ray Disc™ Player.
If the setup option is greyed out, it means the setting cannot be changed at the current state.
If the setup option is greyed out, it means the setting cannot be changed at the current state.
1
Press the
SETTING button in stop mode to display the setup screen.
2
Press
OK to enter the Setting menu.
3
Use the / button to select an option and press
OK.
4
Press the button or the
RETURN button to return to the previous menu.
(Sample Illustration) General operations settings