Toshiba t 720 Manuel D’Utilisation

65

64

1) Copy the folder created by the JPEG Conversion Tool, or its contents, onto a memory

PC card.

2) Use the steps 

, 

 in “Projecting images stored in a memory PC card” 

 to

display a list of thumbnails.

3) Follow the instructions in step 

 to find slide001.jpg (the first slide), and move the

orange frame over it (select slide001.jpg).

4) Set the remote control to [PJ Mode], and press the 

 button. An enlarged view of the

first slide appears on the screen. This starts the presentation.

5) To continue to the next slide, click on the remote control’s 

 button. To go back to the

previous slide, click on the 

 button.

● Creating a screen capture and converting it into a JPEG file

This function saves the current computer screen as a JPEG file.

(1) In the Conversion Method field, select Creating screen

capture.

(2) In the File settings field, click on the Browse button for File

name after conversion.

The Save As dialog box appears.

(3) In the Save As dialog box:

(a) Specify the location in which to save the converted file;
(b) Enter a file name of up to 8 characters in the File Name

field; and

(c) Click on the Save button.

(4) (a) In the JPEG Conversion Tool window, click on

the Conversion button.

(b) A confirmation message appears. Click Yes.

The computer creates a screen capture, and
converts it into a JPEG file in the specified
location. When it is finished, a message
appears to tell you that a JPEG file has been
created.

• The maximum resolution of JPEG files created with the JPEG Conversion Tool is 1,024

x 768 pixels.

(1)

(1)

(2)

(2)

(4)-(a)

(4)-(a)

(3)-(b)

(3)-(c)

(3)-(a)

(4)-(b)

(4)-(b)

The indicator lights inform you of internal abnormalities.

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

⇒ Returns to standby after about 2 minutes. If the projector fails to

operate normally after turning the power back on, either the lamp
needs replacing, or there is a problem with the projector.
• If a lamp burns out, replace it with a new one.
• Unplug the power cord, and contact your dealer.

⇒ Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not

blocked.

• Unplug the power cord and wait for a short while, then turn the

power back on.

• Clean the air filter. 

❈ The 

 icon will appear before the power goes out.

❈ After displaying the abnormal state for about 2 minutes, returns

to standby.

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈ The 

 icon will appear before the power goes out.

❈ After displaying the abnormal state for about 2 minutes, returns

to standby.

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover. 

❈ The 

 icon will appear before the power goes out.

❈ After displaying the abnormal state for about 2 minutes, returns

to standby.

• Make sure to unplug the power cord if something goes wrong.
• If the power cord is unplugged before cooling is complete, give the lamp time to cool

before plugging it back in. If the lamp overheats it may fail to light. Unplugging the power
cord repeatedly when the temperature is high will shorten the life of the lamp. (Even if
you are not concerned about lamp lifetime, the light may not come on if you do not wait
at least 3 minutes.)

or

(Red lit)

(Off)

(Red lit) (Red lit)

Or
(Green lit)

(Green lit) (Red lit)

(Red lit)

Or

(Off)

Or
(Orange lit)

Or
(Orange lit or flashing)

(Red lit or flashing)

(Red lit)

(Orange
flashing)

(Red lit)