MiTAC w130 Instruction De Maintenance
11
of the frame buffer memory by organizing the frame buffer in the system
memory. The frame buffer size can be allocated from 8MB to 64MB.
memory. The frame buffer size can be allocated from 8MB to 64MB.
Features
Processor/Host
Bus
Support
Intel
®
Pentium-M processor
2X
Address,
4X
data
Support host bus Dynamic Bus Inversion (DBI)
Supports system bus at 400MT/s (100 MHz)
Supports 64-bit host bus addressing
8-deep
In-Order-Queue
AGTL+ bus driver technology with integrated GTL termination resistors
and low voltage operation (1.05V)
Supports Enhanced Intel® SpeedStepTM Technology (EIST) and
Geyserville III
Support for DPWR# signal to Pentium-M processor for PSB power
management
1.3.4 Memory System
Directly supports one DDR channel, 64-bts wide (72-b with ECC).
Supports 200-MHz and 266-MHz DDR devices with unbuffered.
PC1600/PC2100 DDR(with ECC).
Supports 128-Mb, 256-Mb and 512-Mbit technologies providing maximum
capacity of 1-GB with only x 16 devices.
All supported devices have 4 banks.
Supports up to 16 simultaneous open pages.
Supports page sizes of 2KB, 4KB, 8KB, and 16KB. Page size is
individually selected for every row.
UMA
support
only.
1.3.5 Display
Analog Display Support
350 MHz integrated 24-bit RAMDAC that can drive a standard progressive
scan analog monitor up to 1800x1350 @ 85 Hz.
Accompanying I2C and DDC channels provided through multiplexed
interface Hotplug and display support
Dual independent pipe with single display support Simultaneous: Same