MiTAC w130 Instruction De Maintenance

Page de 75
 28
4 Power Management 
The Tetra system has built in several powers saving modes to prolong the 
battery usage. User can enable and configure different degrees of power 
management modes via ROM CMOS setup (booting by pressing F2 key). 
Following are the descriptions of the power management modes supported. 
4.1 System Management Mode 
Full on mode 
 
In this mode, each device is running with the maximal speed. CPU clock is up 
to its maximum. 
 
Doze Mode 
 
In this mode, CPU will be toggling between on & stop grant mode either. The 
technology is clock throttling. This can save battery power without loosing 
much computing capability. 
The CPU power consumption and temperature is lower in this mode. 
 
Standby mode 
 
For more power saving, it turns of the peripheral components. In this mode, 
the following is the status of each device: 
--CPU: Stop grant 
--LCD: backlight off 
--HDD: spin down 
 
Suspend to DRAM 
 
The most chipset of the system is entering power down mode for more power 
saving. In this mode, the following is the status of each device: 
 
„
 CPU: 
off 
„
  Twister K: Partial off