kymco mo movie125150 Instruction De Maintenance

ASSEMBLY
Install the springs, plungers and rollers onto

the clutch body.

Install the clutch cover by aligning the clutch

cover anchor pin with the hole in the clutch

body.  Apply locking agent to the threads of

the clutch cover bolts and tighten them.
Torque: 1.2kg-m
Apply engine oil to the needle bearing and

starter drive gear and then install them to the

clutch body.

INSTALLATION
Install the starter clutch onto the crankshaft.

Apply engine oil to the starter idle gear and

shaft and then install them.

Hold the starter drive gear with the universal

holder and tighten the starter clutch lock nut.
Torque: 9.5kg-m

Universal Holder

Install the right crankcase cover. (!4-7)

Special

Note that the lock nut is left threaded.

＊

Lock  Nut  Wrench

Lock  Nut

Universal Holder

Clutch Body

Anchor  Pin

Hole

Clutch Cover