kymco mo movie125150 Instruction De Maintenance

Remove the frame body cover. (!2-2)

Disconnect the A.C. generator connector.

Measure the pulser coil resistance between

the blue/yellow and green wire terminals.
Resistance: 40_

300W/20℃

Refer to page 14-6 for the A.C. generator

removal.

Remove the timing hole cap.

Warm up the engine and check the ignition

timing with a timing light.

When the engine is running at 1700rpm, the

ignition timing is correct if the “F” mark

aligns with the index mark within ±3°.
Ignition Timing: 13° BTDC/1700rpm

This test is performed with the stator

installed in the engine.

＊

The CDI unit is not adjustable.  If the

ignition timing is incorrect, inspect the

CDI unit, pulser coil and A.C. generator

and replace any faulty parts.

＊

Timing Hole Cap