kymco mo d200 Instruction De Maintenance

18

. STARTING SYSTEM

18-3

STARTER MOTOR

REMOVAL

Remove the seat, met-in box and frame center

cover. (2-3)

Remove the waterproof rubber jacket and

disconnect the starter motor cable.

Remove the two starter motor mounting bolts

and the motor.

DISASSEMBLY
Remove the two starter motor case screws,

front cover, rear cover, motor case and other

parts.

INSPECTION
Inspect the removed parts for wear, damage

or discoloration. Replace if necessary.

Clean the commutator if there is metal

powder between the segments.

Check for continuity between pairs of the

commutator segments and there should be

continuity.

Also, make a continuity check between

individual commutator segments and the

armature shaft. There should be no

continuity.

AC 110V

Commutator

• Before removing the starter motor, turn

the ignition switch OFF and remove

the battery ground.  Then, turn on the

ignition switch and push the starter

button to see if the starter motor

operates  properly.

＊

Front  Cover

Starter Motor Cable

Motor  Case

Case Screws