kymco mo movie125150 Instruction De Maintenance

Install the drive pulley face, starting ratchet

and drive face nut.

Hold the drive pulley with the universal

holder and tighten the drive face nut.
Torque: 5.5kg-m

Universal Holder

Remove the left crankcase cover. (!9-2)

Remove the drive pulley and drive belt.

(!9-3)

Hold the clutch outer with the universal

holder and remove the clutch outer nut.

Universal Holder
Remove the clutch outer.

INSPECTION
Inspect the clutch outer for wear or damage.

Measure the clutch outer I.D.
Service Limit: 125.5mm replace if over

Drive Pulley Face

Starting  Ratchet

Special

Special

Do not get oil or grease on the drive belt

or pulley faces.

＊

Clutch Outer

Drive Face Nut

Drive Pulley

Universal Holder

Universal Holder

•

When installing the drive pulley

face, compress it to let the drive belt

move downward to the lowest position

so that the drive pulley can be

tightened.

•

Install the starting ratchet by

aligning the starting ratchet teeth with

the crankshaft teeth.

＊