kymco mo zx50 Instruction De Maintenance

Place the brake master cylinder on the

handlebar and install the holder with “up”

mark facing up.  Be sure to align the punch

mark with the holder joint.

First tighten the upper bolt and then tighten

the lower bolt.
Torque: 1.0_

1.4kg-m

Install the brake fluid pipe with the

attaching bolt and two sealing washers.

Install the handlebar covers. (!12-3)

Fill the brake reservoir with recommended

brake fluid to the upper limit and bleed air

according to the method stated in 13-9.

BRAKE CALIPER (FRONT)
Removal
Remove the brake caliper. (!13-10)

Place a clean container under the brake

caliper and disconnect the brake fluid pipe

from the caliper.

Bolts

Punch  Mark

“Up”  Mark

Bolt

Do not spill brake fluid on any coated

surfaces.

＊