kymco mo filly 50lx Instruction De Maintenance
8
. CYLINDER/PISTON
8-1
FILLY LX 50
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• The cylinder and piston can be serviced with the engine installed in the frame.
• After disassembly, clean the removed parts and dry them with compressed air before inspection.
• After disassembly, clean the removed parts and dry them with compressed air before inspection.
SPECIFICATIONS
Item
Standard (mm)
Service Limit (mm)
I.D.
50.00-50.01
Warpage
æ
0.05
Cylindricity
æ
0.05
True roundness
æ
0.05
Ring-to-groove Top
0.015-0.050
0.09
clearance
Second
0.015-0.050
0.09
Top
0.08-0.20
0.45
Piston,
Ring end gap
Second
0.05-0.20
0.45
piston ring
Oil side rail
0.20-0.70
æ
Piston O.D.
49.97-49.990
49.9
Piston O.D. measuring
position
position
9mm from bottom of skirt
æ
Piston-to-cylinder clearance
0.010-0.040
0.1
Piston pin hole I.D.
13.002-13.008
13.04
Piston pin O.D
12.994-13.000
12.96
Piston-to-piston pin clearance
0.002-0.014
æ
Connecting rod small end I.D. bore
13.016-13.034
13.06
TROUBLESHOOTING
• When hard starting or poor performance at low speed occurs, check the crankcase breather for
white smoke. If white smoke is found, it means that the piston rings are worn, stuck or broken.
Compression too low or uneven
compression
Excessive smoke from exhaust muffler
• Worn, stuck or broken piston rings
• Worn or damaged piston rings
• Worn or damaged cylinder and piston
• Worn or damaged cylinder and piston
Compression too high
Abnormal noisy piston
• Excessive carbon build-up in combustion
• Worn cylinder, piston and piston rings
chamber or on piston head
• Worn piston pin hole and piston pin
SERVICE INFORMATION......................8-1
PISTON REMOVAL ................................ 8-2
TROUBLESHOOTING.............................8-1
PISTON INSTALLATION....................... 8-6
CYLINDER REMOVAL ...........................8-2
CYLINDER INSTALLATION................. 8-6
Cylinder