kymco mo x500 Instruction De Maintenance

 

Install the oil collar and O-rings

Clean the right and left crankcase mating

surface thoroughly, being careful not to

damage them.

Install the dowel pins and O-ring.

Apply a light but through coating of sealant

(Threebond 1215 or equivalent) to all

crankcase mating surfaces except the oil

passage area.

Install the right crankcase over the left

crankcase.
Install and turn in the right crankcase bolt but

do not tighten it.

Install and tighten the left crankcase bolts in a

crisscross pattern in 2 – 3 steps to the

specified torque.

Tighten the right crankcase bolt to the

specified torque.

Make sure that the crankshaft turns smoothly.

  Oil Collar/O-rings              Dowel Pin/O-ring

                                      Dowel Pins

                Bolts

                                      Bolt