kymco mo x500 Instruction De Maintenance

 

GENERAL INSTRUCTIONS
• All servicing operations and inspections in this section can be made with the engine installed.
• Drain the coolant before removing the right crankcase cover.
• Be careful not to drain the coolant when the engine temperature is high. (Perform this operation

when the engine is cold.)

• Drain the coolant into a clean container.
• Drain the engine oil into a clean container before removing the right crankcase cover.
• When the right crankcase cover is installed, fill with the recommended engine oil and coolant.

Then, bleed air from the water jacket.

• Refer to section 17 for alternator inspection, and to section 18 for ignition pulse generator

inspection.

Item

Standard

Service Limit

Starter driven gear I.D.

27.026 (1.081)～27.045 (1.0818)

27.1 (1.084)

Starter driven gear O.D.

45.66 (1.8264)～45.673 (1.8292)

45.6 (1.824)

Flywheel puller

E054

Flywheel holder

E021

Flywheel nut: 55 N•m (5.5 kgf•m, 40 lbf•ft)

Starter motor turns, but engine does not turn
• Faulty starter clutch

• Damaged starter reduction gear