kymco mo movie125150 Instruction De Maintenance
6
. ENGINE REMOVAL/INSTALLATION
6-2
ENGINE REMOVAL
Disconnect the battery negative cable.
Remove the frame body cover. (!2-2)
Disconnect the engine negative cable.
Disconnect the spark plug high tension wire.
Disconnect the auto bystarter wire connector.
Disconnect the starter motor cable from the
starter relay.
Remove the spark plug cap and disconnect
the ignition coil wire from the set plate.
Disconnect the fuel tube at the carburetor
side.
Disconnect the auto fuel valve vacuum tube
from the tee tube.
Disconnect the throttle cable from the
carburetor.
Loosen the drive belt air cleaner connecting
tube band screw and remove the connecting
tube.
Starter Relay
Auto Bystarter Wire
Connector
Fuel Tube
Connecting Tube
Vacuum Tube
Tee Tube
Ignition Coil Wire
Starter Motor Cable
Screw