kymco mo x500 Instruction De Maintenance
11. FINAL REDUCTION
11-2
XCITING 500
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• The servicing operations of this section can be made with the engine installed.
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
• The servicing operations of this section can be made with the engine installed.
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: SAE 90#
Oil Capacity:
At disassembly : 0.55 L (0.57 US qt, 0.5 Imp qt)
At change
Oil Capacity:
At disassembly : 0.55 L (0.57 US qt, 0.5 Imp qt)
At change
: 0.45 L (0.48 US qt, 0.4 Imp qt)
TORQUE VALUES
Transmission case cover bolt
27 N•m (2.7 kgf•m, 20 lbf•ft)
Oil drain bolt
24 N•m (2.4 kgf•m, 18 lbf•ft)
Oil filler bolt
24 N•m (2.4 kgf•m, 18 lbf•ft)
SPECIAL TOOLS
Bearing puller
E037
Oil seal & bearing driver
E014
Universal bearing puller
E030
TROUBLESHOOTING
Engine starts but motorcycle won‘t move
• Damaged transmission
• Damaged transmission
• Seized or burnt transmission
• Faulty drive and driven pulleys/clutch
Abnormal noise
• Worn, seized or chipped gears
• Worn, seized or chipped gears
• Worn bearing
Oil leaks
• Oil level too high
• Oil level too high
• Worn or damaged oil seal
• Cracked crankcase