buell s1 lightning '97 Manuel
7-38
TURN SIGNAL FLASHER
REMOVAL
NOTE
The turn signal flasher is not repairable. Replace the unit if it
fails.
fails.
1.
Remove seat and tail section. See
TAIL SECTION,
REMOVAL
in Section 2.
2.
Remove screw from clamp.
3.
Remove turn signal flasher and detach both wires.
INSTALLATION
1.
Connect both wires to flasher.
2.
Place flasher inside clamp so prongs on flasher face
inside and down.
inside and down.
3.
Install on flasher and clamp on frame with screw.
1
WARNING
Check for proper turn signal operation before riding
motorcycle. Visibility is a major concern for motorcy-
clists. Failure to have proper turn signal operation could
lead to personal injury.
motorcycle. Visibility is a major concern for motorcy-
clists. Failure to have proper turn signal operation could
lead to personal injury.
4.
Check turn signals for proper operation.
Figure 7-39. Turn Signal Flasher
5682
Flasher