buell s1 lightning '97 Manuel
7-28
AC Output Check
1.
Test AC output.
a. Disconnect voltage regulator wiring at connector
[P17].
b.
Connect an AC voltmeter across both stator sockets.
c.
Run the engine at 2000 RPM. The AC output should
be 38-52 volts AC.
be 38-52 volts AC.
2.
Compare test results to specifications.
a. If the output is below specifications, charging prob-
lem could be a faulty rotor or stator.
b. If output is good, charging problem might be faulty
regulator/rectifier. Replace as required.
3.
Check the output again as described under
.
Figure 7-25. Check Stator AC Voltage Output
5685a