kymco mo d200 Instruction De Maintenance

4

. LUBRICATION SYSTEM

4-3

ENGINE OIL/OIL FILTER

Remove the oil dipstick and check the oil

level with the oil dipstick.

If the level is near the lower level, fill to the

upper level with the recommended engine oil.
OIL CHANGE

Remove the oil drain bolt located at the left

side of the engine to drain the engine oil.

After the oil has been completely drained,

install the aluminum washer and tighten the

oil drain bolt.

Torque: 14.7N-m

Pour the recommended oil through the oil

filler hole.

OIL FILTER SCREEN
Drain the engine oil.

Remove the oil filter screen cap.

Remove the oil filter screen and spring.

Check the oil filter screen for clogging or

damage and replace if necessary.  Check the

filter screen O-ring for damage and replace if

necessary.

Install the oil filter screen, spring, O-ring and

filter screen cap.

Torque: 14.7N-m
Recommended Oil: SAE15W40#  API: SG/CD

  Oil Capacity:
    At disassembly:

1.1 liter

    At change:

0.9 liter

Start the engine and check for oil leaks.  Start

the engine and let it idle for few minutes, then

recheck the oil level.

Oil Dipstick

Oil Drain Bolt

Oil Filter Screen Cap

•

Place the motorcycle upright on

level ground for engine oil level check.

•

Run the engine for 2_ 3 minutes

and check the oil level after the engine is

stopped for 2_ 3 minutes.

•

The engine oil will drain more

easily while the engine is warm.