kymco mo movie125150 Instruction De Maintenance

Bolts

Starter Idle Gear

Bolts

Nut

Pump Driven Gear

Starter Clutch

After the oil pump is installed, tighten the

two mounting bolts.

Install the pump driven gear and drive chain

by aligning the pump driven gear with the

cutout in the pump shaft.

Install and tighten the pump driven gear nut.
Torque: 1.0kg-m

Install the oil separator cover and tighten the

bolts.

Install the starter idle gear and starter clutch.

(!16-8)

Install the gasket and dowel pins.

Oil Separator Cover

Gasket

Dowel Pin