kymco mo kxr 50 Instruction De Maintenance

INSPECTION
Inspect the starter one-way clutch drive gear
teeth for burrs/chips/roughness/wear.

Inspect the starter one-way clutch drive gear
contacting surfaces for pitting/wear/damage.

Push the weight roller to arrow direction for
unsmooth operation. _ Replace starter
clutch assembly.

Install the starter one-way clutch driver gear in

the reverse order of removal.

s

 Torque: 5.0_ 6.0kgf-m

Check starter clutch operation.
Clutch operation checking steps:

s

 Install the starter wheel gear to the starter

clutch, and hold the starter clutch.

s

 When turning the wheel gear clockwise (1)

the starter clutch and the wheel gear should

be engaged. If not, the starter clutch is

faulty. Replace it.

s

 When turning the wheel gear

counterclockwise (2), the wheel gear

should turn freely. If not, the starter clutch

is faulty. Replace it.

Starter Oneway Clutch

Drive Gear

Starter Oneway Clutch

32mm  Lock  Nut

Starter Clutch Bolts

Contacting Surfaces

Teeth

Do not reuse the starter clutch bolts that

have been removed.

＊