kymco mo x500 Instruction De Maintenance

     

RADIATOR CAP INSPECTION
Remove the radiator cap (page 6-6).

Pressure test the radiator cap.

Replace the radiator cap if it does not hold

pressure, or if relief pressure is too high or

too low.

It must hold the specified pressure for at

least six seconds.

    108 kPa (1.1 kg/cm², 16 psi)

Pressurize the radiator, engine and hoses,

and check for leaks.

Repair or replace components if the system

will not hold the specified pressure for at

least six seconds.

PREPARATION
● The effectiveness of coolant decreases

with the accumulation of rest or if there is

a change in the mixing proportion during

usage. Therefore, for best performance

change the coolant regularly as specified

in he maintenance schedule.

● Mix only distilled, low mineral water

with the antifreeze.

Excessive pressure can damage the

cooling system components. Do not

exceed 137 kPa (1.4 kg/cm², 20 psi).

＊

Radiator Cap

Cap Tester

Before installing the cap in the tester,

wet the sealing surfface.

＊

Cap Tester