kymco mo bw250 Instruction De Maintenance

Remove the starter one-way clutch rollers,

plungers and springs.

INSTALLATION
Install the starter driven gear onto the

crankshaft.

Install the starter idle gear and shaft.

Install the flywheel onto the crankshaft by

aligning the key on the crankshaft with the

groove in the flywheel.

Hold the flywheel with the flywheel holder

and tighten the flywheel nut.
Torque: 

53.9_

63.7N-m

Starter Idle Gear

Shaft

Groove

• Before installation, check and make

sure that the inside of the flywheel is

not contaminated.

＊

Starter Driven Gear

Flywheel

Key

Flywheel Holder