kymco mo bw250 Instruction De Maintenance

Turn the ignition switch ON.

Turn on the headlight switch.

Adjust the headlight aim by turning the

headlight aim adjusting bolt.

Start the engine and check the clutch

operation by increasing the engine speed

gradually.

If the motorcycle tends to creep or the engine

stalls, check the clutch shoes for wear and

replace if necessary.

COOLANT LEVEL INSPECTION
Place the motorcycle on its main stand on

level ground.

Check the coolant level of the reserve tank

and the level should be between the upper

and lower level lines.

If necessary, fill the reserve tank with

recommended coolant to the “F” level line.

Recommended Coolant: SIGMA Coolant

          (Standard Concentration 30%)

Remove the front cover.

Remove the radiator cap.

Remove the drain bolt to drain the coolant

and tilt the motorcycle to the right and the

coolant will drain more easily.

Drain the coolant in the reserve tank.

Reinstall the drain bolt.

Fill the radiator with the specified coolant.

Lower Line

Headlight Aim Adjusting Bolt

Upper  Line

Radiator Cap

• The coolant level does not change no

matter the engine is warm or cold. Fill

to the “F” (upper) line.

＊

• The coolant freezing point should be

5℃  lower than the temperature of

the riding area.

＊

• Perform this operation when the engine

is cold.

＊

Reserve  Tank