BMW serie 7 1999 Manuel D’Utilisation
110
n
Integrated Universal Remote Control
*
Glove compartment
Clearing the channel keys
Read and comply with the safety
precautions on page
precautions on page
<
The memory of individual channel keys
cannot be deleted. However, the three
channel keys can be cleared together
as follows:
cannot be deleted. However, the three
channel keys can be cleared together
as follows:
> Press and hold both outside keys of
the Integrated Universal Remote
Control until the indicator lamp
flashes, and then release them.
Control until the indicator lamp
flashes, and then release them.
All of the channel keys are cleared.
User information
Do not use this BMW Universal Trans-
mitter with any garage door opener that
lacks safety "stop" and "reverse" fea-
tures as required by federal safety stan-
dards (this includes any garage door
opener model manufactured before
April 1, 1982).
mitter with any garage door opener that
lacks safety "stop" and "reverse" fea-
tures as required by federal safety stan-
dards (this includes any garage door
opener model manufactured before
April 1, 1982).
This device complies with Section 15 of
the FCC Rules. Operation is subject to
the following two conditions: As defined
in the regulations, this device must not
emit harmful interference, and must be
shielded against interference from ex-
ternal sources to prevent unauthorized
or inadvertent activation.
the FCC Rules. Operation is subject to
the following two conditions: As defined
in the regulations, this device must not
emit harmful interference, and must be
shielded against interference from ex-
ternal sources to prevent unauthorized
or inadvertent activation.
To open
Pull the handle down. The lighting will
be switched on.
be switched on.
It is also possible to swivel out the
glove compartment after opening for
improved driver access.
glove compartment after opening for
improved driver access.
To close
Push the lid up after repositioning.
380de060
Online Edition for Part-No. 01 41 9 791 187 - © 12/98 BMW AG