kymco mo zx50 Instruction De Maintenance

OIL TANK REMOVAL
Remove the rear carrier. (!12-5)

Remove the frame body cover. (!12-5)

Remove the oil meter connector.

Remove the two bolts attaching the oil tank.

Disconnect the oil inlet line.

Drain the oil inside the oil tank into a clean

container.

Remove the oil tank.

The installation sequence is the reverse of

removal.

• Connect the oil line properly.
• Bleed air from the oil pump after

installation.

• The oil tube clip (at the oil tank side)

must be locked from inside of the oil

tube joint.

＊

Wire  Connector