Yamaha 007POTO-G0 Manuel D’Utilisation
102
Inserting an external device into a channel
LS9-16/32 Owner’s Manual
E
Output port select popup button
F
Input port select popup button
These buttons select the output port and input port that
are patched to insert-out and insert-in. The currently
selected output port and input port are shown.
are patched to insert-out and insert-in. The currently
selected output port and input port are shown.
G
INSERT ON/OFF button
This button turns the insert on/off. To switch this on/
off, move the cursor to this button and use the [DEC]/
[INC] keys or the [ENTER] key.
off, move the cursor to this button and use the [DEC]/
[INC] keys or the [ENTER] key.
4
Move the cursor to the output port select
popup button, and press the [ENTER] key.
popup button, and press the [ENTER] key.
The OUTPUT PORT SELECT popup window will
appear, allowing you to select the output port that will
be patched to insert-out.
appear, allowing you to select the output port that will
be patched to insert-out.
1
Category tab
These tabs select the output ports that are shown in the
popup window. Each tab corresponds to the following
output ports.
popup window. Each tab corresponds to the following
output ports.
●
SLOT {1/2}
Shows output channels 1–16 of the slot(s) {1/2}.
●
RACK
Shows the inputs of racks 1–8. Use these when you
want to insert a GEQ or effect into that channel.
want to insert a GEQ or effect into that channel.
B
Port select button
This selects the output port that is assigned to insert-
out.
out.
5
Use the category tabs and the port select
buttons to select the insert-out port.
buttons to select the insert-out port.
6
Move the cursor to the CLOSE button and
press the [ENTER] key to return to the pre-
vious screen.
press the [ENTER] key to return to the pre-
vious screen.
7
Move the cursor to the input port select
popup button, and press the [ENTER] key.
popup button, and press the [ENTER] key.
The INPUT PORT SELECT popup window will
appear, allowing you to select the input port that will
be patched to insert-in.
appear, allowing you to select the input port that will
be patched to insert-in.
1
Category tab
These tabs select the input ports that are shown in the
popup window. Each tab corresponds to the following
input ports.
popup window. Each tab corresponds to the following
input ports.
●
SLOT {1/2}
Shows input channels 1–16 of the slot(s) {1/2}.
●
RACK
Shows the outputs of racks 1–8. Use these when
you want to insert a GEQ or effect into the chan-
nel.
you want to insert a GEQ or effect into the chan-
nel.
B
Port select button
This selects the input port that is assigned to insert-in.
8
Use the category tabs and the port select
buttons to select the insert-in port.
buttons to select the insert-in port.
9
Move the cursor to the CLOSE button and
press the [ENTER] key to return to the pre-
vious screen.
press the [ENTER] key to return to the pre-
vious screen.
10
Move the cursor to the insert point select
box, and use the dial or the [DEC]/[INC]
keys to select the insert point.
box, and use the dial or the [DEC]/[INC]
keys to select the insert point.
You can select PRE EQ (immediately before the EQ)
or PRE FADER (immediately before the fader).
or PRE FADER (immediately before the fader).
11
Move the cursor to the INSERT ON/OFF but-
ton, and press the [DEC]/[INC] keys or the
[ENTER] key to turn it ON.
ton, and press the [DEC]/[INC] keys or the
[ENTER] key to turn it ON.
This enables the insertion you specified.
LS9-16
1
2
• After moving the cursor to the insert-out patch select box in
step 4, you can also select the output port by using the dial or
the [DEC]/[INC] keys instead of pressing the [ENTER] key.
the [DEC]/[INC] keys instead of pressing the [ENTER] key.
HINT
LS9-16
1
2