Yamaha aw1600 Manuel D’Utilisation

AW1600  Owner’s Manual

9

Mixdo

wn and bounce oper

ations

A popup window will appear which allows you to 
select the source edit track.

A popup window will appear which allows you to 
select the record destination track and the virtual track.

This will select the PITCH FIX display.

1 EXIT button

Move the cursor to the EXIT button and press 
[ENTER] to exit from the PITCH FIX mode and 
return to the BOUNCE page.

B

To monitor the vocal track prior to pitch correction, 
move the cursor to this button and press [ENTER].

C

Indicates the track to be edited (the source track). This 
field is only for display, and cannot be edited.

D

Indicates the track and virtual track to which the pro-
cessed source track will be recorded (the destination 
track). This field is only for display, and cannot be 
edited.

E

Selects the method of pitch correction/shift from the 
three ways below.

• SCALE ........Specify the scale via received MIDI 

notes to adjust the pitch. For example, 
if you play a chord on a connected 
MIDI keyboard, the pitch is shifted by 
the notes included in the chord.

• NOTE...........The pitch is changed according to the 

received MIDI note.

• PANEL.........This lets you adjust the pitch by speci-

fying a scale from the keyboard on the 
display.

F

Sets this to an appropriate value to maximize the accu-
racy of the pitch change of the original signal. Gener-
ally, this should be set to Normal; however, for low 
vocals, set this to Male, and for high vocals, set it to 
Female.

G

This determines the time resolution for pitch change. 
The shorter the setting, the more quickly the pitch 
change is recognized. The longer the setting, the more 
slowly pitch changes are made, resulting in more 
abrupt, step-like pitch changes.

H

This determines the speed resolution for pitch change. 
The faster the setting, the more quickly the pitch is 
changed, increasing the apparent effectiveness of the 
pitch change function. When this is set to “000,” there 
is no pitch change.

I

This determines the vocal quality (character) of the 
pitch-adjusted signal. Positive (+) values result in a 
higher voice quality and negative (–) values result in a 
lower voice quality.

J

This determines the octave setting of the pitch-
adjusted signal. The range is from –2 to 2 octaves in 
semitone steps. The integer and fraction segments of 
the value are set separately.

K

The graphic keyboard can be used to specify notes 
when the CTRL parameter is set to PANEL. To turn a 
note on or off, move the cursor to the desired note and 
press [ENTER].

J

1 D 2

E

G C

H

F

I

K