Yamaha rdx-e700 Manuel D’Utilisation

If you connect an external recorder to the DVD receiver, you can record sources played back on the DVD receiver. For 
details on the connection methods, refer to “CONNECTING EXTERNAL COMPONENTS” (page 11).

Make sure you read the manuals for your equipment to operate them.

If you connect the DIGITAL OPTICAL OUT jack on the 
DVD receiver to the optical digital input jack on an 
external recorder such as a CD recorder or MD recorder 
using optical cables (page 11), you can record audio 
sources from the DVD receiver.

• Radio stations are not output from the DIGITAL OPTICAL 

OUT jack. To record AM/FM broadcasts, use a commercially 
available audio cable to connect the AUX OUT L/R jack on the 
DVD receiver to the analog input jack on your recorder.

• Be sure to perform a test recording before an actual recording.
• Turning off the external recorder connected to the DVD receiver 

may distort playback sounds or reduce the volume. In this case, 
turn on the external recorder.

• The volume level and audio quality have no effect on the 

recorded sound during recording. However, if the input source 
is set to DVD/CD, the output sound for recording may cut off if 
the headphones are connected/disconnected.

• Depending on the recorder, some DTS software audio signals 

may not record properly.

• Audio recordings that you make cannot be used for any purpose 

other than private enjoyment without the consent of the 
copyright holder.