Yamaha rdx-e700 Manuel D’Utilisation

In addition to controlling this unit, you can operate external components with the remote control for the DVD receiver by 
selecting the appropriate remote control code (refer to “LIST OF REMOTE CONTROL CODES” at the end of this 
manual).

Depending on the product, the remote control may not be able to operate the external component. In this case, use the remote control 
supplied with the product.

You can set a remote control code for TV on the TV 
button on the remote control, and a remote control code 
for Cable TV or Digital Broadcast Satellite tuner on the 
AUX button on the remote control.

Refer to “Available operations” (page 43) and 
try one of the button operations for your 
component to check that the setting is 
working properly.
If the button operation does not work properly, the 
remote control code may be incorrect. In this case, 
perform step 1 again.

• Even if you set a remote control code, it will be cleared about 

two minutes after the remote control batteries run out. In this 
case, store remote control codes again after replacing the 
batteries. (Be careful not to press the remote control buttons 
while replacing the batteries. Doing so may clear the settings.)

• If the manufacturer of your component has more than one code, 

try each of them until you find the correct one.

uPRESET

PRESETd