Yamaha RX-460 Manuel D’Utilisation

Page de 16
1
Select the source to be recorded.
.
*
To dub from tape to tape, refer to the “Notes” shown at
right.
*
When selecting AUXTUNERCD or PHONO, be sure
that TAPE 1 and/or TAPE 2 are not also selected.
2
Play the source and then turn the VOLUME control  up
to confirm the input source.  (For detailed information
on the tuning operations, refer to the page 10.)
3
Set the tape deck  in the recording mode.
4
To monitor the audio signals being recorded, press the
input selector button for the tape deck being used to
make the recording.
8
SOURCE
Tape deck connected to
the TAPE 2 terminals.
RECORDER
Tape deck connected to
the TAPE 1 terminals.
Notes
VOLUMEBASSTREBLEBALANCE and LOUDNESS
control settings have no effect on the material being
recorded.
To dub from tape to tape, only the following one way of
dubbing can be performed.
TO RECORD A SOURCE TO TAPE
INPUT
TAPE 2
TAPE 1
AUX
TUNER
CD
PHONO
MONITOR
COPY
INPUT
TAPE 2
TAPE 1
AUX
TUNER
CD
PHONO
COPY
MONITOR
1,4
2