Emerson SAG581126000 Manuel D’Utilisation

SAG581126000 

System Application Guide 

Issue AD, November 23, 2009 

Spec. No. 581126000 (Model 700

NVBA

) 

Page 40 of 123 

 

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy 

Systems, North America, Inc.  Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited. 

♦  Single Voltage Distribution (+24V) 
♦  500A Maximum Capacity 
♦  (2) Distribution Fuse Mounting Positions 

(70 to 600A TPH-Type) 

♦  (1) Load Shunt (800A, 50mV) per load fuse is provided.  Extended shunt leads are 22 AWG stranded 

wire, approximately 7-10 ft. long from exit point at bottom of Distribution Cabinet.  Each shunt lead is 
equipped with a 49.9 ohm current limiting resistor.   

Can be installed in any bus position A-D (row 1-4) of a 1-, 2-, 3-, or 4-bus row cabinet.  

Does not provide connection for load returns (see Ordering Notes). 

1)  To terminate load returns within the distribution cabinet, order one (1) 

 for up to two (2) List AJ. 

2)  Order fuses as required per 

.  Order replacement alarm fuses (1/4A) per 

. 

3)  Order load lugs (two hole, 3/8 bolt clearance hole, 1” centers) as required for each distribution position 

per Table 

. 

1"

2-1/8"

LOAD 
CONNECTIONS

LOAD 

CONNECTIONS

LOAD

2-1/8"

2-1/8"

2-1/8"

3/8-16 CAPTIVE NUT, 
6 PLACES (CUSTOMER 
MUST PROVIDE LUG BOLTS 
AND ADDITIONAL HARDWARE.
BOLT LENGTH: 1-1/4")

3/8-16 CAPTIVE NUT, 
6 PLACES (CUSTOMER 
MUST PROVIDE LUG BOLTS 
AND ADDITIONAL HARDWARE.
BOLT LENGTH: 1-1/4")

LOAD