Eagle Electronics cuda 240i s Manuel D’Utilisation
7
To activate NMEA Output:
From the Communication Ports menu, press
↓ to highlight NMEA
Output. Press
ENT
to check (turn on) or uncheck (turn off) the NMEA
Output checkbox.
To exit the Communication Ports menu, press
EXIT
|
EXIT
|
EXIT
.
Configure NMEA
Once in the Communication Ports menu, you can configure the unit to
use specific NMEA sentences. (The default setting has all NMEA
sentences turned on.) Press
use specific NMEA sentences. (The default setting has all NMEA
sentences turned on.) Press
↓ to
C
ONFIGURE
NMEA
|
ENT
.
NMEA Sentences selection menu.
A menu appears showing the prefixes of the available NMEA sentences.
A check mark next to a prefix means the prefix is in use. Use
A check mark next to a prefix means the prefix is in use. Use
↑ ↓ → ←
to select a prefix, then press
ENT
to turn off the prefix. (Press
ENT
again
to check the box and turn a prefix on.)
NOTE:
The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:
These are the functions of the various selectable prefixes:
•
GLL transmits latitude and longitude of present position, time of
position fix, and status.
position fix, and status.