Epson equity 286 plus Manuel D’Utilisation

Make sure the holes fit over all the pins and then push the
connector onto the pins.

Caution
If you do not correctly align the holes with the pins, you

could severely damage your hard disk drive when you

push in the connector.

4.

Pick up the hard disk drive and hold it above the vertical

mounting area so the mounting plate is facing the

subassembly, as shown below.

Notice that there are two tabs facing downward on the

bottom of the mounting plate. These tabs will fit into two

slots in the right side of the subassembly.

B-l6

Installing and Removing Disk Drives