Epson 3010E Manuel D’Utilisation

Making Detailed Adjustments

■

Swap Screens

Select this option to quickly switch the images on the left and right sides of the split 
screen display.

■

Audio Source

Use this setting to select which screen’s audio you want to hear while in split screen mode. 

Note: Select Auto to hear audio from either the largest screen or the screen on the left 
(depending on the Screen Size setting).

Your projector comes with 8 memory locations that are reserved for color mode calibration by 
installers. In addition, there are 2 memory locations where you can save other customized 
settings to obtain the best picture quality for each of your video inputs.

Note: Certain menu options may not be available when Auto is selected as the Color Mode.

Memory settings can be used to store most of the picture quality settings on page 41 and color 
settings on page 43. Before saving them to memory, adjust the settings to the desired levels.

1. Press the 

Memory

 button on the remote control.

2. Select 

Save Memory

.

3. Select the memory name you want to use, then press the 

Enter

 button to save your 

settings.

Note: Saved settings are indicated by a green highlight

 next to the memory name. If you select 

a name that is already in use, the existing settings will be erased and new ones saved in their 
place. 

Split Screen Setup > Swap Screens

Split Screen Setup > Audio Source

pl3010_3010e_UG.book  Page 49  Wednesday, September 7, 2011  6:28 PM