Epson powerlite 1080 ub Manuel D’Utilisation
58
Problem Solving
The picture is upside-down or reversed.
Change the
Projection
Only part of the picture is displayed, or the picture is distorted.
■
Press the
Aspect
button to select a different aspect ratio (see page 28).
■
If the Aspect is set to
Zoom
, you may need to use the
Zoom Caption Pos.
option to see
■
Check the
Output Scaling
to make sure it’s adjusted correctly (see page 44).
■
Use the
Position
setting to reposition the image on the screen (see page 44).
■
If you’ve connected a computer and you see only half the image, make sure the
computer’s Dual Display setting is turned off.
computer’s Dual Display setting is turned off.
The picture isn’t rectangular.
■
If the image looks like
or
, the projector has been placed off to one side of the
screen and angled toward it. Face the projector straight ahead (instead of at the center of
the screen), then use the horizontal lens shift dial to center the image (see page 25).
the screen), then use the horizontal lens shift dial to center the image (see page 25).
■
If the image looks like
or
, make sure the projector is not tilted up or down.
The picture contains static or noise.
■
Make sure the
Input Signal
is set correctly for your connected video equipment (see
■
If you’re viewing still images and you notice flickering or horizontal lines, turn on the
Progressive
setting (see page 37).
■
Make sure your cables are securely connected at both ends.
Click here