Epson 5020UB Manuel D’Utilisation

Making Detailed Adjustments

■ High Altitude Mode

Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn 
this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or 
higher.

Note: The maximum operating altitude is 7500 feet (2286 meters).

■ Trigger Out

Turn on this setting to have the 

Trigger out

 port output a 12-volt signal (max. 200 mA) 

to lower your projection screen when the projector is running. 

Note: If you change this setting, the new setting will take effect the next time you turn the 
projector on.

You can use the 

LCD Alignment

 feature to manually adjust the color convergence of the 

projected image. 

Note: Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in 
focus before you begin the LCD alignment process. 

For best results, the projected image should be a minimum of 60” (152 cm) diagonally and the 
projection surface should not be colored or textured, otherwise the adjustment grids will be 
difficult to align.

Extended > Operation > High Altitude Mode

Extended > Operation > Trigger Out