Auto Page rs-855lcd Manuel D’Utilisation

 

 

18

If you installed the optional temperature sensor, you can 
monitor, through the LCD screen,  the present indoor 
temperature of the passenger compartment before cooling 
or heating your vehicle.   

Press the transmitter 

 buttons first, within 3 seconds 

press the 

 (

)  button, the in-door temperature will be 

shown on the LCD screen. This reading may be higher than 
actual ambient temperature due to the greenhouse and is 
relative only the inside vehicle temperature.

 

 

When the engine is running (by remote start), if you want to 
stop it,   

1.  Press 

 

  button once on the remote transmitter under 

remote start mode. 

2.  Move the optional remote start enable toggle switch to OFF 

position. (If installed) 

3. 

Press the brake pedal The vehicle will shut down and turn 
off the parking light

 to indicate engine stopped.

 

    

 

If any of the following conditions exist while the system is operating, the 
engine will not start or will shut down immediately: 

1. The hood is opened. 
2. The brake pedal is pressed. 
3. Engine is over-revved. {“Tachometer checking type” only}  
4. The pre-programmed run time (5 /10 / 20 / 30 minutes) has elapsed. 

5. 

Press 

  button once on the remote transmitter under remote start mode.

 

6. Move the optional remote start enable toggle switch to OFF positio n. (If 

installed) 

7. The vehicle refused to start running after {3} unsuccessful attempts. 

H. DISABLING THE REMOTE START SYSTEM: 

(If installed) 

This feature allows your system’s remote start unit to be temporarily disabled 
to prevent the vehicle from being remote started accidentally. This feature is 
useful if the vehicle is being serviced or stored in an enclosed area. To 
disable the remote start, move the optional remote start enable toggle switch 
to the OFF position.