Technicolor - Thomson dpl906vd_en Manuel D’Utilisation
13
Radio
EN
The player has a built-in tuner that allows for
FM radio function.
FM radio function.
Manual tuning
1.
Connect the FM aerial in the correct manner.
2.
Press several times the
SOURCE
button
on the remote control or on the front
panel to select the Tuner mode.
panel to select the Tuner mode.
3.
Tune a station by pressing repeatedly
BACKWARD
or
FORWARD
on the
remote control until the desired station is
found.
Alternatively, you can use the
found.
Alternatively, you can use the
SCAN-
or
SCAN+
button to activate the automatic
search function. In this mode the player will
automatically tune frequencies until it finds
a station.
automatically tune frequencies until it finds
a station.
4.
Repeat steps 3 to tune to another radio
station.
station.
Note: If there is any interference, change the
aerial’s position until the ideal sound reception is
obtained.TV and other electronic devices could be
the cause of interferences, so try to position the
aerial away from them.
aerial’s position until the ideal sound reception is
obtained.TV and other electronic devices could be
the cause of interferences, so try to position the
aerial away from them.
Storing radio stations
The player can store up to 40 radio stations in
its memory.You can enter every single radio
station yourself or the player can store all
available radio stations automatically in
ascending order.
its memory.You can enter every single radio
station yourself or the player can store all
available radio stations automatically in
ascending order.
Automatic preset programming
1.
Press the
SOURCE
button to enter the
Tuner mode.
2.
Press and hold
PROGRAM
down for 3
seconds to start automatic preset
programming.
programming.
Note: A weak signal can affect the "Automatic
preset programming” function’s efficiency. Adjust
the aerial for better reception and a more
efficient search.
preset programming” function’s efficiency. Adjust
the aerial for better reception and a more
efficient search.
3.
Radio frequencies will be browsed and
radio stations stored automatically.When
all the available radio stations are stored or
all 40 memory locations are full, the auto
preset programming function will stop.
radio stations stored automatically.When
all the available radio stations are stored or
all 40 memory locations are full, the auto
preset programming function will stop.
Manual preset
1.
Tune to a radio station (see "Manual
tuning" for details).
tuning" for details).
2.
Press
SLOW/MEMORY
on the remote
control. P00 will appear on the display.
3.
Input your desired preset number (1-40)
using the numeric buttons, then press
using the numeric buttons, then press
SLOW/MEMORY
again to store it.
Retrieving preset stations
1.
Press the
SOURCE
button to enter the
Tuner mode.
2.
Press
PRESET-
or
PRESET+
or
the numeric buttons on the remote
control to select a preset station.
control to select a preset station.
DPL906VD_EN 12/08/05 9:54 Page 13