Avid Technology digi 1 Manuel D’Utilisation

 

7  

 

When the connector and slot are aligned, press the card into the slot using firm, even 

pressure. The card should “pop” into place. Secure the card with the previously removed 
screw. Make sure the card’s audio connectors are accessible through the rear slot of the 
computer.

 

8  

 

Close the computer case.

 

Connecting the Digi 001 I/O Box

 

▲

 

Your computer must be off when you connect or disconnect the I/O Box.

 

To connect the Digi 001 I/O box: 

 

1  

 

Locate the connector cable with the wide ends that came with your Digi 001.

 

2  

 

Align a cable end with the connector on the Digi 001 PCI Card, and insert the cable into 

the connector until it clicks into place. 

 

3  

 

Align the other cable end with the Computer connector on the Digi 001 I/O Box, and 

insert the cable into the connector until it clicks into place.

 

4  

 

Turn on your computer.

Available PCI slot
in your computer

Digi  00I card

Connect cable here

Connect cable here